Lunar-CNC Machinist & Programmer-III or IV (Evergreen)
Application close date:
Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight!
This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities.As part of a hardworking team of engineers and technical specialists, you will serve as a hands-on CNC Machinist & Programmer supporting emergent fabrication and machining for Lunar Operations. In this combined role, you will take hardware from engineering intent to finished and inspected parts by reviewing models and drawings, developing machining strategy, creating CAM programs, setting up and running 3-axis and 5-axis mills and CNC turning centers, performing manual machining when needed, and executing final part inspection. You will thrive in a fast-paced development environment where processes are still being built, documentation matters, and flexibility and ownership are critical to delivering flight-relevant hardware.
Shifts: 1st | Mon-Fri (8am-5pm)
Locations: Space Coast, FL
Relocation: Available
Program, set up, and operate 3-axis and 5-axis CNC mills and CNC lathes and turning centers to produce precision parts that meet engineering requirements.
Create and prove-out Siemens NX CAM programs, including tool selection, workholding approach, and cutting parameters, targeting HAAS equipment when applicable.
Perform complete job execution from planning through inspection, including setups, setup sheets and tool lists, safe prove-out, offsets and comp adjustments, and documentation for repeatability.
Execute first-article and development builds, optimizing feeds, speeds, toolpaths, workholding, and sequencing to improve cycle time, surface finish, and dimensional capability.
Machine and finish components in materials like aluminum, stainless steels, Inconel, and Monel using disciplined tool-life and heat management.
Perform in-process and final inspection using precision measurement tools like micrometers, calipers, height gages, indicators, and bore gages.
Record inspection results clearly and support CMM and Metrology as required.
Troubleshoot machining and process issues like chatter, tool wear and breakage, workholding distortion, dimensional drift, and surface damage, then implement corrective actions.
Maintain a safe, organized shop environment and follow safety and quality procedures to protect flight and mission-critical hardware.
Support manual machining and benchwork like drill and tap, ream, deburr, blend, and fit up when CNC is not the best solution.
Collaborate with Engineering, Quality, and Operations to clarify requirements, resolve discrepancies, and provide practical feedback on machinability and inspection approach while maintaining schedule.
Contribute to building shop capability by standardizing tooling, programming templates, probing strategies, and documentation, and support preventive maintenance and basic machine health checks.
High school diploma or GED plus relevant technical training, or equivalent hands-on experience.
5+ years of combined CNC machining and programming experience producing tight-tolerance hardware.
Demonstrated ability to set up and run mid-to-high complexity jobs, including datum strategy, work offsets, tool length offsets, and safe prove-out practices.
Ability to read and interpret engineering drawings and specifications, including GD&T per ASME Y14.5 at a working level.
Working knowledge of CNC programming concepts and the ability to edit and verify G-code as needed.
Experience holding tolerances to ±0.001 in or tighter where required, and selecting appropriate inspection methods to verify conformance.
Proficiency with shop math like trigonometry and basic computer skills like Windows and common documentation tools.
Ability to troubleshoot process issues and communicate clearly with cross-functional teams in a fast-paced environment.
Ability to safely work in an industrial and manufacturing environment.
Experience with HAAS mills and lathes, including best practices for safe prove-out, tool management, and probing.
Proficiency with Siemens NX CAM, including multi-axis programming, simulation and verification, and disciplined programming workflow.
Demonstrated success machining difficult materials like Titanium, Inconel, Monel, and stainless steels, including tool selection, surface integrity awareness, and tool-life management.
Experience with 5-axis simultaneous machining and complex multi-op workholding like soft jaws, vises, tombstones, and custom fixtures.
Familiarity with machining simulation tools like Vericut or equivalent, plus probing and on-machine measurement.
Experience supporting development programs where requirements evolve quickly and the machinist and programmer helps define best-known methods.
Exposure to related processes like heat treat, EDM, grinding, welding, coatings and plating, and how they influence machining strategy and inspection.
Trade school certification, A.S. degree in machining or manufacturing technology, or equivalent advanced training.
Don’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.
Description
- High school diploma or GED plus relevant technical training, or equivalent hands-on experience.
- 5+ years of combined CNC machining and programming experience producing tight-tolerance hardware.
- Demonstrated ability to set up and run mid-to-high complexity jobs, including datum strategy, work offsets, tool length offsets, and safe prove-out practices.
- Ability to read and interpret engineering drawings and specifications, including GD&T per ASME Y14.5 at a working level.
- Working knowledge of CNC programming concepts and the ability to edit and verify G-code as needed.
- Experience holding tolerances to ±0.001 in or tighter where required, and selecting appropriate inspection methods to verify conformance.
- Proficiency with shop math like trigonometry and basic computer skills like Windows and common documentation tools.
- Ability to troubleshoot process issues and communicate clearly with cross-functional teams in a fast-paced environment.
- Ability to safely work in an industrial and manufacturing environment.
Description
- Experience with HAAS mills and lathes, including best practices for safe prove-out, tool management, and probing.
- Proficiency with Siemens NX CAM, including multi-axis programming, simulation and verification, and disciplined programming workflow.
- Demonstrated success machining difficult materials like Titanium, Inconel, Monel, and stainless steels, including tool selection, surface integrity awareness, and tool-life management.
- Experience with 5-axis simultaneous machining and complex multi-op workholding like soft jaws, vises, tombstones, and custom fixtures.
- Familiarity with machining simulation tools like Vericut or equivalent, plus probing and on-machine measurement.
- Experience supporting development programs where requirements evolve quickly and the machinist and programmer helps define best-known methods.
- Exposure to related processes like heat treat, EDM, grinding, welding, coatings and plating, and how they influence machining strategy and inspection.
- Trade school certification, A.S. degree in machining or manufacturing technology, or equivalent advanced training. Culture Statement Don’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.
- Where is this Lunar-CNC Machinist & Programmer-III or IV (Evergreen) role based?
- The role is based in Space Coast, FL.
- What experience does Blue Origin expect for this role?
- The posting is tagged as a mid-level role, typically 3+ years of experience. Check the requirements section for specifics.
- How was this posting sourced?
- This role was pulled directly from Blue Origin's Workday careers site. Apply links open in the employer's own ATS — no reposts or aggregator middleware.
Apply links open in the employer's official ATS. Always verify recruitment messages on the company's careers page before sharing personal information.